Dragonfly 37 Degree Flares

Alphabetically by Filename

JPG/GIF Still Photos
1 Tube Before Fitting.JPG
1 Tube Before Fitting.JPG
2 Sand and File Tube.JPG
2 Sand and File Tube.JPG
3 Clean 1.25 Inches Of Bare Metal.JPG
3 Clean 1.25 Inches Of Bare Metal.JPG
4 Slide Nut then Sleeve over Tube.JPG
4 Slide Nut then Sleeve over Tube.JPG
5 Clamp Tool Bottom over Tubing.JPG
5 Clamp Tool Bottom over Tubing.JPG
6 Top of Tubing is Flush With Tool.JPG
6 Top of Tubing is Flush With Tool.JPG
7 Attach Tool Top.JPG
7 Attach Tool Top.JPG
8 Assembled Tool Ready To Crank.jpg
8 Assembled Tool Ready To Crank.jpg
9 Crank Cone Down to Create Flare.JPG
9 Crank Cone Down to Create Flare.JPG
A Flared Tubing Ready For Cleanup.JPG
A Flared Tubing Ready For Cleanup.JPG
B Flared End Burnished and Ready.JPG
B Flared End Burnished and Ready.JPG
C Other Fittings just Screw On.JPG
C Other Fittings just Screw On.JPG
D Header Tank with 3 new Fittings.JPG
D Header Tank with 3 new Fittings.JPG
E Whats Wrong With This Picture.JPG
E Whats Wrong With This Picture.JPG
F Finished Installation.jpg
F Finished Installation.jpg

List of All Folders

All photos © Copyright 2005-2017 by the Owner of this Web Site - All rights reserved - Not to be copied without permission from the owner

Human Settings